| Model | A Full Width | B Max Extension | C Fabric Width | Awning Weight |
|---|---|---|---|---|
| NQ603-200150 | 2.0m / ≈6.5ft | 1.5m / ≈4.9ft | 1.83m / ≈6.0ft | 18.8kg |
| NQ603-250200 | 2.5m / ≈8.2ft | 2.0m / ≈6.5ft | 2.33m / ≈7.6ft | 22.8kg |
| NQ603-300250 | 3.0m / ≈9.8ft | 2.5m / ≈8.2ft | 2.83m / ≈9.3ft | 27.0kg |
| NQ603-350250 | 3.5m / ≈11.5ft | 2.5m / ≈8.2ft | 3.33m / ≈10.9ft | 30.4kg |
| NQ603-400250 | 4.0m / ≈13.1ft | 2.5m / ≈8.2ft | 3.83m / ≈12.6ft | 35.6kg |
| NQ603-450250 | 4.5m / ≈14.8ft | 2.5m / ≈8.2ft | 4.33m / ≈14.2ft | 41.2kg |
| NQ603-500250 | 5.0m / ≈16.4ft | 2.5m / ≈8.2ft | 4.83m / ≈15.8ft | 46.8kg |
Note: Full width comes in 0.5 m steps from 2.0 m to 5.0 m, and the extension shown is the maximum available at that width. Shorter extensions and custom widths are produced to order — send us your project requirements and we will confirm what is possible.
- 6063-T5 aluminum profiles
- Powder-coated aluminum cassette and structural components
- Triple-layer 480 gsm PVC fabric with a 1000D polyester mesh core
- Material test reports available for review
- Standard sizes from 2.0 m to 5.0 m
- Gloss white or matte dark gray cassette
- P102 light or P103 dark fabric
- Private labeling and packaging options
- COB light strip configuration
- Custom widths and extensions outside the standard range
- Distributor documentation and project support
NQ603 or NQ604
NQ603 | NQ604🔗 | |||
| Operation | Hand crank | One-touch electric, Dooya tubular motor | ||
| Power required | None | 12V DC to power motor | ||
| Control | Crank | Wall switch standard, remote optional | ||
| Sizes | Width: | Coming in 0.5 m steps from 2.0 m to 5.0 m | Width: | Coming in 0.5 m steps from 2.0 m to 5.0 m |
| Extension: | Up to a maximum of 2.5 m | Extension: | Up to a maximum of 2.5 m | |
| Max extension is always shorter than the full width | Max extension is always shorter than the full width | |||
| Weight | 18.8-46.8 kg | 19.8-47.3 kg | ||
| Integrated lighting | Optional COB light strip in front bar | Optional COB light strip in front bar | ||
| Wind sensor | Not available | Optional — retracts the awning automatically | ||
Note:The NQ603 and NQ604 are the same awning. Same cassette, same super-reinforced legless arms, same 6063-T5 structure, same 480 gsm PVC fabric. From the outside they are identical — the difference is entirely in how they open.
Choosing between legs and legless? Read the guide → /legless-rv-awning-structure/
Frequently Asked Questions
The arms. The NQ603 uses super-reinforced arms designed to carry the full span freestanding, with chain-linked joints that keep the fabric under even tension. Nothing touches the ground, which is the point: you can park close to a kerb, on a slope, or on decking and still open the awning fully.
It is engineered differently, not built to a lower standard. Legs transfer load to the ground; a legless awning carries it through super-reinforced arms and the wall brackets, which is why both the arms and the mounting are heavier on this model.
But strength is not the same as all-weather capability, and legless does not mean the awning can be left out in bad weather. No retractable awning — with legs or without — is designed for wind, heavy rain or snow. Wind lifts the fabric and twists the arms. Standing water pools in the fabric and drags the front bar down. Snow load will bend the arms outright. Close the awning before weather sets in, and before you leave the vehicle. Damage caused by leaving it extended in these conditions is not a material or manufacturing fault.
No. Open it when you are there, close it when you are not. Weather changes faster at a campsite than most people expect, and an awning left out unattended is the most common way these products get damaged. The NQ603 has no legs to unpin, so closing it is a few turns of the crank.
Yes, with adapters. Standard wall brackets are included; profiled walls, high-roof conversions and coachbuilt bodies need an adapter set, which we select for the specific vehicle. Send us the model and we will confirm the bracket set before you order.
Same awning, different operation. The NQ603 is hand-cranked; the NQ604 runs on a Dooya tubular motor. Choose the NQ603 when you want nothing electrical to install or service, and the NQ604 when one-touch operation matters more.
Why NATURE AWNING

Awning Experience Since 2006
Focused on awning manufacturing since 2006, with experience from garden awnings to RV awnings.

Reliable Material Selection
6063-T5 aluminum profiles, powder-coated surface treatment and 480 gsm PVC fabric for long-term outdoor performance.

Stable OEM Manufacturing
Complete production control from material processing, assembly, testing to final packaging.

Global Partner Support
Technical documents, installation guidance and marketing support for distributors and dealers worldwide.










